JLine :: RV-10 Build
   


About
Build log for an RV-10

By
Jae Chang
web@jline.com

Contents (Index)
These are links to the major kits for the project.

  • RV-10 Home Page
  • Latest Entries
  • Tools -- Photos
  • Airframe
    Tail -- Photos
    Wings -- Photos
    Fuse -- Photos
  • Avionics -- Photos
  • Finishing
  • Links

    Subscribe
    Subscribe to a syndicated feed of my weblog, brought to you by the wonders of RSS.

    Flavours
    There's more than one way to view this weblog; try these flavours on for size.

  • index
  • circa 1993
  • RSS

    • Links
    These are a few of my favourite links.

  • Van's Aircraft
  • Van's Airforce

    • Comments
    Most recent comments in the last ...

  • 30 days


    		•         
    Sun, 09 Dec 2007

    Section 17: Outboard Leading Edge (8 hours)

    1. Final riveted the outboard most rib. Left this undone so that installing the Duckworks mounting bracket would be slightly easier.

    2. Installed the Duckworks lights.

    Drilled and installed the nutplates onto the ribs.

    Created the mounting brackets for the lights to span the 15.5" span between the outer 2 ribs.

    Cutout the hole for the lights. Used a jigsaw. Then sanded down with a 1" drum sander. My first use of it, and i love it.

    [IMG_5515] [IMG_5516]

    posted at: 18:36 | path: /aviation/build/airframe/wings/sec17 | permanent link to this entry | add a comment